Thanks Thanks:  0
Likes Likes:  0
Dislikes Dislikes:  0
Results 1 to 6 of 6
  1. #1
    Technician
    Join Date
    Jun 2010
    Location
    eustis, florida
    Posts
    25
    Rep Power
    29

    C60 code 093-317

    Been fighting this problem I just replaced the black dispense assembly and black dv assy with no luck .The machine will run about 100 prints before it codes out .Any suggestions ?

  2. #2
    Service Manager 1,000+ Posts
    Join Date
    Aug 2006
    Posts
    1,650
    Rep Power
    57

    Re: C60 code 093-317

    Check black developer drive clutch

  3. #3
    Technician
    Join Date
    Aug 2019
    Location
    Kuching, Sarawak
    Posts
    17
    Rep Power
    10

    Re: C60 code 093-317

    Check also dispenser K. Might be blocked

    Sent from my EML-L29 using Tapatalk

  4. #4
    Senior Tech 100+ Posts
    C60 code 093-317

    SeniorTch's Avatar
    Join Date
    Jun 2017
    Posts
    116
    Rep Power
    15

    Re: C60 code 093-317

    Quote Originally Posted by apcrap View Post
    Been fighting this problem I just replaced the black dispense assembly and black dv assy with no luck .The machine will run about 100 prints before it codes out .Any suggestions ?
    check the toner cartridge motor and toner cartridge

  5. #5
    Junior Member
    Join Date
    Mar 2015
    Posts
    7
    Rep Power
    0

    Re: C60 code 093-317

    Quote Originally Posted by SeniorTch View Post
    check the toner cartridge motor and toner cartridge
    Check the developer cover that goes to developer tank. Sometimes the plastic on black got fold or broken.

  6. #6
    Technician Dech's Avatar
    Join Date
    Aug 2014
    Location
    Brisbane
    Posts
    48
    Rep Power
    0

    Re: C60 code 093-317

    If the toner is blocked, it blows F10 fuse on the iot Pwb and the toner motor sometimes burns its brushes. if this happens replace iot and motor... Check the seal on the inner cover( the toner falls through the inner cover to the dev tank) the seal between the dev tank and inner cover. Ive have factory fitted seals fitted of centre causing the toner to back up in the tube.. You can remove the seal and centre it , or order a new inner cover ( 802K65485 Inner cover assy...) Hope this helps you..

Tags for this Thread

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  
Get the Android App
click or scan for the Copytechnet Mobile App

-= -= -= -= -=


IDrive Remote Backup

Lunarpages Internet Solutions

Advertise on Copytechnet

Your Link Here