Page 1 of 2 12 LastLast
Results 1 to 10 of 11
  1. #1
    Senior Tech 100+ Posts
    Join Date
    Aug 2018
    Location
    NSW
    Posts
    121
    Rep Power
    13

    Xerox J75 Staple Saddle Stitched off centered

    Hello,

    Could anyone please advise if it's possible to adjust the stapler for Xerox J75 so it staples the booklet right on the spine or at the creased. At the moment it appeared to be about 2-3mm off the spine...please see attached photos.

    - Xerox J75
    - Standard Finisher (Light Production C)
    & Finisher D4
    20201106_141544-2.jpg 20201106_141606-2.jpg
    Thanks in advance for your assistance
    J

  2. #2
    Senior Tech 250+ Posts
    Join Date
    Jun 2018
    Location
    Newton Ground
    Posts
    295
    Rep Power
    15

    Re: Xerox J75 Staple Saddle Stitched off centered

    Ok let me see if I can assist you, calling an audible ere lol.
    OK you log in under admin status.
    Go to machine status
    There is an option in there for adjustment and you can adjust the staple option and also the fold option

    Sent from my SM-G955F using Tapatalk

  3. #3
    Senior Tech 100+ Posts
    Join Date
    Aug 2018
    Location
    NSW
    Posts
    121
    Rep Power
    13

    Re: Xerox J75 Staple Saddle Stitched off centered

    Quote Originally Posted by positiveg View Post
    Ok let me see if I can assist you, calling an audible ere lol.
    OK you log in under admin status.
    Go to machine status
    There is an option in there for adjustment and you can adjust the staple option and also the fold option

    Sent from my SM-G955F using Tapatalk
    Thanks for your quick response. I can't locate the adjust and fold option. It just shows, machine configuration, software version, paper tray, print reports and overwrite hard disk standby. At machine menu status It just shows list of installed programs.

    Thanks
    J

  4. #4
    Senior Tech 250+ Posts
    Join Date
    Jun 2018
    Location
    Newton Ground
    Posts
    295
    Rep Power
    15

    Re: Xerox J75 Staple Saddle Stitched off centered

    Did you log in as admin?
    Hold down 0 then hit start button then enter 6789


    Sent from my SM-G955F using Tapatalk

  5. #5
    Senior Tech 100+ Posts
    Join Date
    Aug 2018
    Location
    NSW
    Posts
    121
    Rep Power
    13

    Re: Xerox J75 Staple Saddle Stitched off centered

    Quote Originally Posted by positiveg View Post
    Did you log in as admin?
    Hold down 0 then hit start button then enter 6789


    Sent from my SM-G955F using Tapatalk
    Yes I did...still logged on as service rep.

  6. #6
    Senior Tech 250+ Posts
    Join Date
    Jun 2018
    Location
    Newton Ground
    Posts
    295
    Rep Power
    15

    Re: Xerox J75 Staple Saddle Stitched off centered

    Ok then when you click machine status there should be an option about paper tray settings etc

    Sent from my SM-G955F using Tapatalk

  7. #7
    Senior Tech 100+ Posts
    Join Date
    Aug 2018
    Location
    NSW
    Posts
    121
    Rep Power
    13

    Re: Xerox J75 Staple Saddle Stitched off centered

    Quote Originally Posted by positiveg View Post
    Ok then when you click machine status there should be an option about paper tray settings etc

    Sent from my SM-G955F using Tapatalk
    It's shows paper tray status and when selected it shows list of installed paper trays and their status. all list can't be selected...

    Screen Shot 2020-11-06 at 3.43.58 pm.jpg Screen Shot 2020-11-06 at 3.43.40 pm.jpg

  8. #8
    Senior Tech 100+ Posts
    Join Date
    Aug 2018
    Location
    NSW
    Posts
    121
    Rep Power
    13

    Re: Xerox J75 Staple Saddle Stitched off centered

    Hello,

    Please does anyone have any remedy for this issue....

    "Could anyone please advise if it's possible to adjust the stapler for Xerox J75 so it staples the booklet right on the spine or at the creased. At the moment it appeared to be about 2-3mm off the spine...please see attached photos."

    - Xerox J75
    - Standard Finisher (Light Production C)
    & Finisher D4
    Attachment 47227 Attachment 47228
    Thanks in advance for your assistance
    J

  9. #9
    Senior Tech 250+ Posts
    Join Date
    Jun 2018
    Location
    Newton Ground
    Posts
    295
    Rep Power
    15

    Re: Xerox J75 Staple Saddle Stitched off centered

    Been away from machine for a week. So back now so I'll also look in service manual and send you the pages for hat. And try to get to the machine and let yoy u know the step by step ok.

    Sent from my SM-G955F using Tapatalk

  10. #10
    Senior Tech 100+ Posts
    Join Date
    Aug 2018
    Location
    NSW
    Posts
    121
    Rep Power
    13

    Re: Xerox J75 Staple Saddle Stitched off centered

    Quote Originally Posted by positiveg View Post
    Been away from machine for a week. So back now so I'll also look in service manual and send you the pages for hat. And try to get to the machine and let yoy u know the step by step ok.

    Sent from my SM-G955F using Tapatalk
    Cheers, awaiting...

Tags for this Thread

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  
Get the Android App
click or scan for the Copytechnet Mobile App

-= -= -= -= -=


IDrive Remote Backup

Lunarpages Internet Solutions

Advertise on Copytechnet

Your Link Here