anybody know the part number for the bracket that holds the fly wheel ?
also the gear that goes on the 1st BTR and goes into the fly wheel
thanks
anybody know the part number for the bracket that holds the fly wheel ?
also the gear that goes on the 1st BTR and goes into the fly wheel
thanks
Flywheel coupler - 822E27071
Mounting Bracket - Not Spared
Sent from my LYA-L09 using Tapatalk
thanks
it does show on the parts book as not spared
was hoping they came up with updates
heard about a retrofit
I believe there is a retrofit kit available for non tag 13 machines, But it does involve quite a bit of work and new front door to convert it over to tag 13.
I think it was designed to fix some of the micro-banding and impact banding issues encountered on the earlier models, but putting the machine into skip pitch mode is another option.
NVM Read/Write > 740 492 > enter 1 for enable or 0 for disable
So if I want to take the fly wheel off I enable it?
dont you think its better to upgrade the software and nvms with the new update
I was suggesting that if you need to remove the flywheel (because of broken components) it is a good idea to run the machine in Skip Pitch mode to slow down the machine to a safe operating speed and remove the micro-banding issue that you may encounter. Updating the software is separate from the NVM Read/Write, the NVM Read/Write is primarily for engineers to change the machine running settings or for making adjustments.
Usually a software update won't touch the NVM setting, but it is always recommended you make a backup to a USB drive first.
Sorry for the confusion.
thanks
Bookmarks