versant 80 error 099-341 Fusing Not Latch Up

[chrisio]

Hi.

I have the v80 with the error code 099-341 according to Xerox I need to reboot the machine with the front door open and and the fuser tray pulled out and then reinstall. Having done this the error remains. I am waiting on the tech getting back to me but is there anything else I can try. It was fine before the christmas break and I left the machine switched on to try an minimise any problems!

Google has virtually nothing on the error code!

Thanks
Chris

[adriansto]

Check if you have dirty pressure roll cam SENSOR.

[chrisio]

Check if you have dirty pressure roll cam SENSOR.

Thanks - will do - can you point me in the general direction of the sensor please.

Chris

[chrisio]

Fixed it!

No idea what I did to be honest... removed and reinserted the fuser a couple of times and exercised the lift mech for the fuser on the table out of the machine and its come good! how long for I don't really know

Thanks
Chris