Xerox Versant 2100 error 78-245
anybody know what this error could be
hopefully not the board like the manual says
thanks
Xerox Versant 2100 error 78-245
anybody know what this error could be
hopefully not the board like the manual says
thanks
Hi azehnali,
The quick and dirty is to mark the suspected PWB and swap its position with the adjacent unit. If the fault code stays the same, start looking at parts driven by it. If the fault code changes, then suspect the PWB.
Alternatively, as per Eureka Tip #1366880, try a DMP Controller upgrade as a last resort to see if this works.
Hope this helps.
fugglefeet
thanks
resolved it weeks ago
it was the board
99.9% of the time its the board
Bookmarks