Versant press 180 ibt belt motor

[@RLaggy]

I have a Xerox Versant Press 180 machine whose IBT belt drive motor is giving a very noisy sound. When I print a file it give a double images output print. I try to use another motor from another same machine but it still have the same problem. Can anyone pls help me with this problem. Is it also bad to transfer that drive motor to another machine. Thank you.

[xeroxbg]

I have a Xerox Versant Press 180 machine whose IBT belt drive motor is giving a very noisy sound. When I print a file it give a double images output print. I try to use another motor from another same machine but it still have the same problem. Can anyone pls help me with this problem. Is it also bad to transfer that drive motor to another machine. Thank you.

Hi @RLaggy!
Try the following: disassemble the IBT Cleaner and start the printer without the cleaner. If the noise disappears then replace the IBT Cleaner assembly.

[@RLaggy]

Hi @RLaggy!
Try the following: disassemble the IBT Cleaner and start the printer without the cleaner. If the noise disappears then replace the IBT Cleaner assembly.

Hi, I have done that already and it's still having the same noise problem. Now if I will replace the drive motor, would you think there is any technical procedure to follow before installing the drive motor?

Thank you for your kind reply. Have a good day.

[xeroxbg]

Hi, I have done that already and it's still having the same noise problem. Now if I will replace the drive motor, would you think there is any technical procedure to follow before installing the drive motor?

Thank you for your kind reply. Have a good day.

There is no special procedure.
Good luck!

[mikimiki]

I have a Xerox Versant Press 180 machine whose IBT belt drive motor is giving a very noisy sound. When I print a file it give a double images output print. I try to use another motor from another same machine but it still have the same problem. Can anyone pls help me with this problem. Is it also bad to transfer that drive motor to another machine. Thank you.

Hi, i have same problem with my versant 2100. Do you fix the problem?

[SeniorTch]

Hi, i have same problem with my versant 2100. Do you fix the problem?

I recently had a problem in a V2100, error 42-384, motor, encoder disk and sensors, wiring continuity, signal voltages in MCU, everything was fine. in the end I replaced

105K31670

AC Power Supply

PL18,4 item 4.
but in versant 80 /180 I am not sure this circuity is the same.

[Phil B.]

Hi, i have same problem with my versant 2100. Do you fix the problem?

different model

please start your own new thread

list EVERYTHING you have tried in the 1st post. it'll save time for us 5o ask a Q then to have you come back..already tried that