hello guys we use this machine in printing radiology there is problem with it there is thin white line appear on images i try many solution nothing slove the problem hope you can help me thanks in advance i attach photos to show the problem
hello guys we use this machine in printing radiology there is problem with it there is thin white line appear on images i try many solution nothing slove the problem hope you can help me thanks in advance i attach photos to show the problem
What you already tried?
Feed direction?
I tried and Change the following transfer belt unit change 4 drums unit and also dev tanks also fuser unit no luck
Clean the ROS Windows
What is ros window and by the way this line on sra3 is horizontal not vertical
you need to blow the developer assembly clean it and then check for any thin marking on the magnetic roller , also rinse the developer with thin mesh to clean all the particals, if the problem is not sorted check the ROS windows.
if it is printed in 4 color mode then check all the colors , if printed in black and white mode then check only R1 Xerographic system.
Bookmarks