Freeflow server problem

[masio]

Hello all,
I am experiencing some problems with freeflow TAG models, (Black Models)
When the RIP boots up, it displays the console login (Console Mode), but the software doesn't load automatically.
What should I have to do to start the software manually?

I've done many times doing Auto repair boot or reconfig boot in the option splash menu, but nothing change. still back to line text with console login.
is it a software or hardware issue ??
I've reinstalled the software image, but nothing change.

regards

[zagrex]

Hello all,
I am experiencing some problems with freeflow TAG models, (Black Models)
When the RIP boots up, it displays the console login (Console Mode), but the software doesn't load automatically.
What should I have to do to start the software manually?

I've done many times doing Auto repair boot or reconfig boot in the option splash menu, but nothing change. still back to line text with console login.
is it a software or hardware issue ??
I've reinstalled the software image, but nothing change.

regards

hello
the problem is caused by the HDD and make sure the system RAM's are 8GB and use them all

[masio]

hello
the problem is caused by the HDD and make sure the system RAM's are 8GB and use them all

Finally...thx for your respons.
ive changed HDD and use all RAMs 8Gb totals, reinstall with dvd image FF and screen goes black after process extracting windowing file system......
Ive done from intaling text mode but same situation too.

For the information, i am using TAM DVD on it and the server is TAG model.
is that a problem ???

regards

[zagrex]

Finally...thx for your respons.
ive changed HDD and use all RAMs 8Gb totals, reinstall with dvd image FF and screen goes black after process extracting windowing file system......
Ive done from intaling text mode but same situation too.

For the information, i am using TAM DVD on it and the server is TAG model.
is that a problem ???

regards

Which machine model (printer)

[masio]

Which machine model (printer)

c700 Press

[zagrex]

c700 Press

There is no version in this dvd.You need a DVD with full image software install dont(TAM DVD)
plain software image with possibly source code in you

[XeroxTechBrazil]

Hello all,
I am experiencing some problems with freeflow TAG models, (Black Models)
When the RIP boots up, it displays the console login (Console Mode), but the software doesn't load automatically.
What should I have to do to start the software manually?

I've done many times doing Auto repair boot or reconfig boot in the option splash menu, but nothing change. still back to line text with console login.
is it a software or hardware issue ??
I've reinstalled the software image, but nothing change.

regards

Could you be using a monitor that is not supported ?

This sounds like you get to the point where your monitor SHOULD light up with whatever desktop the software is using. If the monitor resolution is not supported, you can see something like what you describe.

It's frustrating, as there is no error reported. The system just hangs.

[masio]

Thx guys for all your respons,
Now my freeflow is working well, its all about software issue.
there is some corupted data in the HDD, so i have done with format comand then re-install the software image. and evrything doing well now.....

Once again thanks for helping me out for this situation....

Regards

[azehnali]

you didnt have to reinstall the software ?
what freeflow version was yours?

[masio]

you didnt have to reinstall the software ?
what freeflow version was yours?

FFPS version 8 Sp.2

sorry for late answer my friend