There is a heavyweight fuser available for this machine (>220GM), it might be worth getting one to try
There is a heavyweight fuser available for this machine (>220GM), it might be worth getting one to try
It could be a matter of poor quality or incompatibility with the fuser. Try purchasing brand name, original toner. If the toner is still not adhering properly, break out the product manual. Or reach out to the manufacturer's tech support. You can try out a Munbyn branded thermal label printer for this purpose.
Go to administration login
Username administration
Password 11111
Press machine status
Find tools on tools find maintenance
On maintenance find adjust image transfer
Place your media A4 A3 or 11x17 cut it place on manual feed tray 5 select side 1 or 2 Press print then you see printed patch -10to+10 put the value you find good patches your problem will solved
Important some case ADJUST IMAGE TRANSFER find in paper setting easily
Last edited by Yuki; 11-16-2022 at 05:02 PM. Reason: Spelling mistake
Bookmarks