XEROX B8045

[TOTO]

Hi i have a xerox altalink b8045 thate won t star up thé screen freese on xerox logo then i change sd card it star and display xerox logo with xerox b8045 but it reboot continusly i make altboot it show up grade in progresse do not ..... And reboot a gaine ,
the firmware was 100.008 i want to up grade on 101.008

any help thinks

regards

[Exok]

The best way to troubleshoot this is by observing the POST (power on self test) code. Find out what the code it at the point of rebooting itself.

[TOTO]

thanks for your answer but the machine does not record any code
another suggestion thanks

[Phil B.]

thanks for your answer but the machine does not record any code
another suggestion thanks

not a code but a progress counter.

ex: 25% 50% 75% also watch the lights on the emod

[xcopytech]

POST code!!!
There is small led display on SBC pwb.
Post here what code you have on that display

[T911]

I have a b8045 with the same problem listed above. My code on the LED Display is 5. Help Appreciated. Thanks

[xcopytech]

Replace sd card

[T911]

anything stored on the sd or just put in a blank one, fw reinstall? Does it need to be formatted before install? X not my cup of tee. Kyo guy

[Murv]

Re-image the SD card.

[T911]

Murv,

I don't have another b8045 to re-image the 4gb sdhc with. do you have one that you can share with me. thanks