Page 1 of 2 12 LastLast
Results 1 to 10 of 12
  1. #1
    Trusted Tech 50+ Posts
    Xerox C60 copy quality issues

    mshabban's Avatar
    Join Date
    Jan 2017
    Location
    kampala
    Posts
    66
    Rep Power
    0

    Xerox C60 copy quality issues

    Hello guys , am having a Xerox C60 printing just only Mat finish , itís only done like 500k clicks , has an EFi fiery stand alone, i have calibrated it over and over , just went into fiery print driver setting and changed everything to best , even set to image smoothen and glossy but all in vain the print doesnít seem to improve, any ideas will be much appreciated

  2. #2
    Senior Tech 250+ Posts jhalfhide's Avatar
    Join Date
    Apr 2015
    Posts
    342
    Rep Power
    18

    Re: Xerox C60 copy quality issues

    You don't seem to have said what the actual quality issue is. Can you post an example? Have you tried test pages from service mode?

    Sent from my LYA-L09 using Tapatalk

  3. #3
    Trusted Tech 50+ Posts
    Xerox C60 copy quality issues

    mshabban's Avatar
    Join Date
    Jan 2017
    Location
    kampala
    Posts
    66
    Rep Power
    0

    Re: Xerox C60 copy quality issues

    Quote Originally Posted by jhalfhide View Post
    You don't seem to have said what the actual quality issue is. Can you post an example? Have you tried test pages from service mode?

    Sent from my LYA-L09 using Tapatalk
    Ok thanks mate for the quick response? Anyway the main issue is poor quality prints , looks blurry, not sharp at all , yet cleaned up the ROS and the Drums seem to be very ok , tried to increase the blush of the developer tanks but the prints seem to still be faint but funny when you make internal test patterns, the prints are much sharper than on just sent from the computers/fiery , so thatís where am really getting confused on what to do.

  4. #4
    Service Manager 10,000+ Posts
    Xerox C60 copy quality issues

    Phil B.'s Avatar
    Join Date
    Jul 2016
    Location
    Raleigh NC
    Posts
    14,216
    Rep Power
    375

    Re: Xerox C60 copy quality issues

    Quote Originally Posted by mshabban View Post
    Ok thanks mate for the quick response? Anyway the main issue is poor quality prints , looks blurry, not sharp at all , yet cleaned up the ROS and the Drums seem to be very ok , tried to increase the blush of the developer tanks but the prints seem to still be faint but funny when you make internal test patterns, the prints are much sharper than on just sent from the computers/fiery , so thatís where am really getting confused on what to do.
    what gsm of the paper?

    what is the PC calling for as far as the weight?

    what is the copier think it is printing to?

    are they using genuine OEM toner/drums

    post examples in PDF format

  5. #5
    Trusted Tech 50+ Posts
    Xerox C60 copy quality issues

    mshabban's Avatar
    Join Date
    Jan 2017
    Location
    kampala
    Posts
    66
    Rep Power
    0

    Re: Xerox C60 copy quality issues

    Quote Originally Posted by Phil B. View Post
    what gsm of the paper?

    what is the PC calling for as far as the weight?

    what is the copier think it is printing to?

    are they using genuine OEM toner/drums

    post examples in PDF format
    Thanks mate for the response, this happens to all types of paper and to all gsm , I have managed to print on different gsm with right paper settings but still does the same , was just wondering if thereís any thing to do with the fiery color profiles, am not an expert in fiery but I just think you guys could be knowing what to do, you asked whether they are using OEM Toners , that for sure I canít tell as itís a refurbished machine with just 500k clicks from Dubai, so canít really tell if the toner is genuine or not,

  6. #6
    Service Manager 10,000+ Posts
    Xerox C60 copy quality issues

    Phil B.'s Avatar
    Join Date
    Jul 2016
    Location
    Raleigh NC
    Posts
    14,216
    Rep Power
    375

    Re: Xerox C60 copy quality issues

    Quote Originally Posted by mshabban View Post
    Thanks mate for the response, this happens to all types of paper and to all gsm , I have managed to print on different gsm with right paper settings but still does the same , was just wondering if thereís any thing to do with the fiery color profiles, am not an expert in fiery but I just think you guys could be knowing what to do, you asked whether they are using OEM Toners , that for sure I canít tell as itís a refurbished machine with just 500k clicks from Dubai, so canít really tell if the toner is genuine or not,
    so when you pull the toners does it say XEROX GENUINE ?

    print the Config page and post it... the machine will display what paper setting is for each tray Type .. size ..weight

    when you turn the machine on does it print a settings page at startup?

    can you use the IP address to login to the machine?

  7. #7
    Trusted Tech 50+ Posts
    Xerox C60 copy quality issues

    mshabban's Avatar
    Join Date
    Jan 2017
    Location
    kampala
    Posts
    66
    Rep Power
    0

    Re: Xerox C60 copy quality issues

    Quote Originally Posted by Phil B. View Post
    so when you pull the toners does it say XEROX GENUINE ?

    print the Config page and post it... the machine will display what paper setting is for each tray Type .. size ..weight

    when you turn the machine on does it print a settings page at startup?

    can you use the IP address to login to the machine?
    Actually on arrival the machine had all the toners in but without toner chips , so replace all the toners with new ones that are sold by xerox rep here, yes on boot up the machine prints a fiery startup page which doesnít look as bad as the printed copies, I am sure I can logon the machine, through the IP address

    thanks truly appreciate

  8. #8
    Service Manager 1,000+ Posts
    Xerox C60 copy quality issues


    Join Date
    Feb 2010
    Posts
    1,750
    Rep Power
    63

    Re: Xerox C60 copy quality issues

    You can't run Xerox production machines using default paper settings. You need to go into admin mode and create your own paper catalogue. You need to print out a transfer adjustment chart (SIQA) and select the row of colors will the best fill. This is the only way to avoid mottle and density issues.

    This video should be the same as a C60 or close enough.

    Xerox Versant 180 Simple Image Quality Adjustment / SIQA Image Transfer - YouTube

  9. #9
    Service Manager 1,000+ Posts
    Xerox C60 copy quality issues


    Join Date
    Feb 2010
    Posts
    1,750
    Rep Power
    63

    Re: Xerox C60 copy quality issues

    Quote Originally Posted by Phil B. View Post
    what gsm of the paper?

    what is the PC calling for as far as the weight?

    what is the copier think it is printing to?

    are they using genuine OEM toner/drums

    post examples in PDF format
    It's all about the paper on these.

  10. #10
    Service Manager 10,000+ Posts
    Xerox C60 copy quality issues

    Phil B.'s Avatar
    Join Date
    Jul 2016
    Location
    Raleigh NC
    Posts
    14,216
    Rep Power
    375

    Re: Xerox C60 copy quality issues

    Quote Originally Posted by JR2ALTA View Post
    It's all about the paper on these.
    Xerox has always ( as far as I know ) a very narrow media requirements.

Tags for this Thread

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  
Get the Android App
click or scan for the Copytechnet Mobile App

-= -= -= -= -=


IDrive Remote Backup

Lunarpages Internet Solutions

Advertise on Copytechnet

Your Link Here