Results 1 to 9 of 9
  1. #1
    Senior Tech 250+ Posts tjvincent's Avatar
    Join Date
    Apr 2008
    Location
    Green Bay, WI
    Posts
    258
    Rep Power
    30

    Question Versant 280 Fiery

    I have the Fiery hooked up to machine but how do you add the fiery application or Icon to the machines panel ?

  2. #2
    Agitating Artificer 250+ Posts CopierTechofOmens's Avatar
    Join Date
    Jan 2009
    Location
    NY
    Posts
    262
    Rep Power
    29

    Re: Versant 280 Fiery

    Reseat the black HDMI-cables from the Fiery to the IOT. The cable for the yellow channel is used as a communication cable between Fiery and IOT, if this cable isn't connect properly, the Fiery will reboot after a short while

  3. #3
    Senior Tech 250+ Posts tjvincent's Avatar
    Join Date
    Apr 2008
    Location
    Green Bay, WI
    Posts
    258
    Rep Power
    30

    Re: Versant 280 Fiery

    I double checked the 2 cables, both are good and going from the Fiery to the proper ports on machine, i can print to the fiery but it still won't load the fiery Application on the machine op panel

  4. #4
    Service Manager 1,000+ Posts
    Join Date
    Aug 2006
    Posts
    1,154
    Rep Power
    45

    Re: Versant 280 Fiery

    Crossover cable between fiery and machine.

  5. #5
    Senior Tech 250+ Posts tjvincent's Avatar
    Join Date
    Apr 2008
    Location
    Green Bay, WI
    Posts
    258
    Rep Power
    30

    Re: Versant 280 Fiery

    Definitely connected otherwise how could I print to the Fiery and it prints out a Fiery config page every time I reboot

  6. #6
    Service Manager 1,000+ Posts
    Join Date
    Aug 2006
    Posts
    1,154
    Rep Power
    45

    Re: Versant 280 Fiery

    Not cable between PC and fiery.
    You must have crossover cable between fiery an versant 280 to be able to run fiery application on machine.

  7. #7
    Senior Tech 250+ Posts tjvincent's Avatar
    Join Date
    Apr 2008
    Location
    Green Bay, WI
    Posts
    258
    Rep Power
    30

    Re: Versant 280 Fiery

    Yes grey Gigabit cable is hooked up between fiery and machine.

  8. #8
    Service Manager 1,000+ Posts
    Join Date
    Aug 2006
    Posts
    1,154
    Rep Power
    45

    Re: Versant 280 Fiery

    Set machine ip address to 100.100.100.101
    Subnet 255.255.252.0
    Gateway 100.100.100.102
    Dns 100.100.100.102

  9. #9
    Senior Tech 250+ Posts tjvincent's Avatar
    Join Date
    Apr 2008
    Location
    Green Bay, WI
    Posts
    258
    Rep Power
    30

    Re: Versant 280 Fiery

    Iím pretty sure that what it is since it looks like it set that automatically with DHCP but Iíll verify on Monday. So the Fiery application should add itself automatically on the panel of the Versant you donít have to add it yourself?

Tags for this Thread

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  
Get the Android App
click or scan for the Copytechnet Mobile App

-= -= -= -= -=


IDrive Remote Backup

Lunarpages Internet Solutions

Advertise on Copytechnet

Your Link Here