Thanks:
0
Likes:
0
Dislikes:
0
-
Junior Member
- Rep Power
- 0
Versant 180 - 4 staple position
Hi guys
Ex-tech now running machines looking for some help with staple positions.
We have a job which is an A5 NCR pad with 2 staples on the left, currently we run 2up on A4 and offline staple.
What I would like to do is run it with online stapling to massively cut down the ache of offline stapling, now you can set the V180 to 4 staple however the position of the staples are all biased towards the centre rather than even
Now what I wanted to know is if there is any NVM adjustmants for stacker stapling positioning as previously as a tech I spent many hours setting up booklet fold and staple positions but never did for the stacker.
Thanks
-
Junior Member
- Rep Power
- 0
Re: Versant 180 - 4 staple position
Update: For anyone searching for this in the future, yes there are NVMs to adjust the staple In/Out positions.
Tags for this Thread
Posting Permissions
- You may not post new threads
- You may not post replies
- You may not post attachments
- You may not edit your posts
-
Forum Rules
Bookmarks