print from bypass tray , 80lb cover 15 sheets ,out from center
every time warm up ,now
start up warm up gear noise very loud ,like gear not engage
from transfer belt end screw or fused side ,don.t know
any idea or comment are welcome
print from bypass tray , 80lb cover 15 sheets ,out from center
every time warm up ,now
start up warm up gear noise very loud ,like gear not engage
from transfer belt end screw or fused side ,don.t know
any idea or comment are welcome
try the following :
1. take out the bypass, check the gear on the left hand side for sign of crack.
2. if you suspect fuser, try replacing it. or inspect the bearing of the pressure roller.
3. record the noise / make a video of the noise
any other sign like, toner status "please replace" eventhough you already replace the toner
Bookmarks