Thanks:
0
Likes:
0
Dislikes:
0
-
Out of the box issue Versalink C7030
Out of the box problem with a C7030. Setup as normal, but this is what I get on the startup page.
DOC080521-08052021085806.jpg
Swapped yellow/black drums, NO black, red Xerox logo ok, then I switched the chip on the back of the drum.
The black chip placed on the yellow drum. Got the same result as above. Pulled inspected the transfer belt unit
and the black developer unit. No issues.
Also, did a factory reset and did the setup all over again. Same result.
HVT?
Tags for this Thread
Posting Permissions
- You may not post new threads
- You may not post replies
- You may not post attachments
- You may not edit your posts
-
Forum Rules
Bookmarks