Xerox WC 7970 does not start after moving to another customer

[pdy-pt]

Hi everybody,

We have a 7970 here that worked wonderfully when we took it down. The road to the new customer was a bit bumpy, but other copiers have survived it just fine.
Anyway, the 7970 powers up, then the green Xerox startup screen comes on for a very long time until the machine name is displayed, and then the machine restarts over and over again. The 7-segment display shows "C.".
The hard disk was replaced a short time ago before transport. Therefore I suspect the SD card. What do you think?
Do any of you have the SD image for a 7970?



Best wishes
Patrick

[CopierTechofOmens]

See if the bouncing knocked the heat sink loose on the SBC.

[adriansto]

If the energy star logo is missing from green screen then can be SD card corruption caused by the SBC board.
I have image file for SD card 4Gb Lexar pn 237E27501 so you can try to rewrite the SD and see if that works. My email = stoadis@gmail.com