Xerox J75 Printer drivers

**mshabban** · 08-31-2021

Hello guys , I am having issues with a J75 built in controller print drivers as I don’t have a working fiery at the moment, I have downloaded all the drivers but seems I can’t find one that works with the built in controller, any suggestions will be highly appreciated.

thanks

**xcopytech** · 09-01-2021

J75 do not have built in controller.
You must have fiery if you want to print

**mshabban** · 09-01-2021

Thanks mate , truly appreciate, but now the problem is my fiery has no display, all fans are running fine and when you remove the Ram , the fiery beeps , so I wonder what could be the issue as it just happened of a sadden, any heir will be appreciated.

**xcopytech** · 09-01-2021

Have you tried to remove bios battery for a couple of minutes.

**InterfaceP** · 09-06-2021

Originally Posted by mshabban

Thanks mate , truly appreciate, but now the problem is my fiery has no display, all fans are running fine and when you remove the Ram , the fiery beeps , so I wonder what could be the issue as it just happened of a sadden, any heir will be appreciated.

It beeps because the RAM in missing. Check the LED display on the side, when working properly it should read "00" if it has another # post it and I will tell you what the issue is.