Thanks Thanks:  0
Likes Likes:  0
Dislikes Dislikes:  0
Results 1 to 5 of 5
  1. #1
    Technician
    Join Date
    Jan 2019
    Location
    bnkl
    Posts
    10
    Rep Power
    6

    Xerox Altalink B8065 DADF multifeeds

    Hello, i have a problem since some time with few machines B8065/75 with multifeeds. This happens with new spdh feed rolls so i guess either xerox produce defective retards or some of feeding components failing me. The problem sometimes happens alot and sometimes not at all. Im testing mostly with sets of 20 sheets, 1 side, long edge and sometimes it gives 19 pages on the counter sometimes its 20 all the time and i just cant catch the problem. Also this happens for now... on 2 machines. One is B8065 1st generation spdh with tag1; 2nd machine B8075 scan tags:1,2,3,5,6,7. So i got alot issues with the B8065 like 1st it started with alot feed jams cos the default mylar guide of the retard roll wasnt proper so ive changed it with some of the inovator kits and it fixed the jams cos mylar was short but atm im almost 100% sure its causing the retard to slips now so im trying to shorten it but the effect seems not fixing the multifeeds permanently. Ive also installed the kit for the even wear of the retard but it seems to cause issues too. So if u got any tips it will be very helpfull. Thx u.

  2. #2
    Master Of The Obvious 10,000+ Posts
    Xerox Altalink B8065 DADF multifeeds

    blackcat4866's Avatar
    Join Date
    Jul 2007
    Location
    Lapeer, Michigan
    Posts
    20,079
    Rep Power
    392

    Re: Xerox Altalink B8065 DADF multifeeds

    Is there a DF separation adjustment? If not, I have had success installing weaker (yes, WEAKER) separation springs to increase page separation. =^..^=
    If you'd like a serious answer to your request:
    1) demonstrate that you've read the manual
    2) demonstrate that you made some attempt to fix it.
    3) if you're going to ask about jams include the jam code.
    4) if you're going to ask about an error code include the error code.
    5) You are the person onsite. Only you can make observations.

    blackcat: Master Of The Obvious =^..^=

  3. #3
    Technician
    Join Date
    Jan 2019
    Location
    bnkl
    Posts
    10
    Rep Power
    6

    Re: Xerox Altalink B8065 DADF multifeeds

    There is only skew adjustment in the dadf, no feeding one. U mean stronger spring? Since it seems 2 sheets r feeded sometimes cos the retard dont push strong enough. Ive kinda ignored the spring till now i focused on the length of mylar cos its mentioned in buletins to cause problems. Ill try check with different springs thx.

  4. #4
    Master Of The Obvious 10,000+ Posts
    Xerox Altalink B8065 DADF multifeeds

    blackcat4866's Avatar
    Join Date
    Jul 2007
    Location
    Lapeer, Michigan
    Posts
    20,079
    Rep Power
    392

    Re: Xerox Altalink B8065 DADF multifeeds

    Pad separation increases page separation with a stronger spring.
    Roller separation increases page separation with a WEAKER spring.

    Which do you have? =^..^=
    If you'd like a serious answer to your request:
    1) demonstrate that you've read the manual
    2) demonstrate that you made some attempt to fix it.
    3) if you're going to ask about jams include the jam code.
    4) if you're going to ask about an error code include the error code.
    5) You are the person onsite. Only you can make observations.

    blackcat: Master Of The Obvious =^..^=

  5. #5
    Technician
    Join Date
    Jan 2019
    Location
    bnkl
    Posts
    10
    Rep Power
    6

    Re: Xerox Altalink B8065 DADF multifeeds

    roll one it is.

Tags for this Thread

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  
Get the Android App
click or scan for the Copytechnet Mobile App

-= -= -= -= -=


IDrive Remote Backup

Lunarpages Internet Solutions

Advertise on Copytechnet

Your Link Here