Drum end of life

[sameh]

I have Xerox WorkCentre 5022 display Drum end of life , replace Drum cartridge . I change the drum cartridge and reset drum counter .
But not solve the problem . can you help me

[Drivee]

hmm

Follow the steps below to initialize the counter.1. Turn on the machine power. Refer to Power Source on page 3-7.2. Enter System Administration Mode. Refer to Entering System Administration Mode on page 9-1for more information.3. Press the and buttons to select. System Settings on the Tools screen.4. Press the OK button.Note To return to the Tools screen, press the Clear All button. To return to the previous screen,press the Back or s button.5. Select Maintenance from the System Settings screen.6. Press the OK button7. Enter the passcode 950807 on the Maintenance screen using the numeric keypad.8. Press the Start button.Start buttonMaintenanceXerox® WorkCentre® 5022/5024 Multifunction PrinterUser Guide12-119. When the Drum Cartridge screen appears, if the Drum Cartridge has been replaced with a newone, press Start

[sameh]

hmm

Follow the steps below to initialize the counter.1. Turn on the machine power. Refer to Power Source on page 3-7.2. Enter System Administration Mode. Refer to Entering System Administration Mode on page 9-1for more information.3. Press the and buttons to select. System Settings on the Tools screen.4. Press the OK button.Note To return to the Tools screen, press the Clear All button. To return to the previous screen,press the Back or s button.5. Select Maintenance from the System Settings screen.6. Press the OK button7. Enter the passcode 950807 on the Maintenance screen using the numeric keypad.8. Press the Start button.Start buttonMaintenanceXerox® WorkCentre® 5022/5024 Multifunction PrinterUser Guide12-119. When the Drum Cartridge screen appears, if the Drum Cartridge has been replaced with a newone, press Start

Thanks for this ,