Hello,
On picture you can see strip in lighter color. I try to change: cyan color drum and cyan developer asm with new one because on test print page only cyan show this stripe, but still the same problem. Color meters is cca 60k copies. All toner is genuine. Do you have idea what is wrong? Thanks
There is no stupid question, just stupid answer
Clean ROS
From your photos I cannot say that problem is definitely
with cyan. It can be any other colour. Print cmyk samples to see if the problem affect only one colour.
+1 on cleaning the ROS
Here's a vid for a Docucolor ROS cleaning procedure, but it will apply to the C60 and Primelinks, as well as others using the same/similar IOT.
https://youtu.be/MrDpzLIhVAQ
Exactly ROS problem. I forgot to clean it. I was on vacation so I didn't get to thank you earlier. Tnx again.
There is no stupid question, just stupid answer
Click "thanks" and/or "Like" for his help.Originally Posted by Apach
Annoys me no end that these models have no cleaning wand.
Sent from my LYA-L09 using Tapatalk
Thanks: 
Likes: 
Dislikes: 
Reply With Quote
Bookmarks