700i Two IQ issues - Struggling to resolve - Maybe me being fussy?

[xcopytech]

Try to print 30% of each color from diagnostic mode.
Then check is defect (banding) present at all colors. If you have defect at all colors then stop print at belt and check for defect.
If defect is not present at belt then check backup roll assy.

[James Yardley]

Try to print 30% of each color from diagnostic mode.
Then check is defect (banding) present at all colors. If you have defect at all colors then stop print at belt and check for defect.
If defect is not present at belt then check backup roll assy.

Ok - Tried the above -

The fault IS showing on the IBT pre transfer and then fault is being transferred to paper pre fuser - this is on all colors.

[adriansto]

Ok - Tried the above -

The fault IS showing on the IBT pre transfer and then fault is being transferred to paper pre fuser - this is on all colors.

Sent you bulletin with high frequency banding. Not really your fault but is good to check.

[James Yardley]

Sent you bulletin with high frequency banding. Not really your fault but is good to check.

Via email?

[adriansto]

Via email?

Yes on email it's pdf file from bulletins.