Xerox 700 - 093-317 nvm reset code

[xcopytech]

Print Procon on print so you can see toner concentartion in developer assy

[inprintservices]

Print Procon on print so you can see toner concentartion in developer assy

OK thanks, I'll try that first

[adriansto]

I'm not sure how to check the no toner sensor.

The dispenser test appears to run fine, the black image thats printed out just looks very dull.

This happened before we changed the dispenser motor, like the developer had been starved of toner.

New motor in place now so assume error 093-317 is repaired, but black image remains very poor

Check the wires and connection with low toner sensor and replace sensor if checkings are ok.
Before you did changed the motor was a good ideea to check it. Probably no the motor was the culprit but low toner sensor. Now you have very litlle toner into developer because sensor dont function properly.

[inprintservices]

Hi Guys

Can anyone describe to me where the low toner sensor is and how i can check its functionality?

I continue to have a repeating black dispenser fault after i have changed motor

[xcopytech]

Replace black dispenser, sensor is on dispenser housing.
Sensor cleaner is broken.
First step, find service manual