Dislikes:
0
-
Technician
- Rep Power
- 1
Re: Altalink C8170 Enter Current Password Message is Displayd at Start Up !!!
yeah, I know ! I found exactly the required firmware file, but did not create the folder ---EFI
with the download files .... and so the machine updated normally and updated all the components and after the reboot it began to ask for a password ... I met people who did it according to the same scheme and the result was like mine ....
they promised to give me all the files like in your photo with...
Thank you so much for this special upload photo!
-
Re: Altalink C8170 Enter Current Password Message is Displayd at Start Up !!!
You have to use all files from same software level.
Full software is about 750mb and if usb altboot do not help then pws altboot is only solution
-
Technician
- Rep Power
- 1
Re: Altalink C8170 Enter Current Password Message is Displayd at Start Up !!!
pws altboot must be done via USB cable?
-
Re: Altalink C8170 Enter Current Password Message is Displayd at Start Up !!!
-
Technician
- Rep Power
- 1
Re: Altalink C8170 Enter Current Password Message is Displayd at Start Up !!!
Thank you!!!! The device is working! exactly helped-special alboot!!!
super forum!!! Good people!!! Thank you!!
-
Technician
- Rep Power
- 5
Re: Altalink C8170 Enter Current Password Message is Displayd at Start Up !!!
Hi Bros,
I had the same trouble on my B&W Altalink B8145 when i installed new HDD.
I created a USB alboot
placed it inside:
DISABLE_DATA_BACKUP
FORCED_UPGRADE
XeroxAltalink_B8145-B8155_ALTBOOT_system-sw#11401301128800#ENG_MOD
I cannot downloaded the Special Alboot folder.
I need your help to solve my trouble.
Thank you!
Tags for this Thread
Posting Permissions
- You may not post new threads
- You may not post replies
- You may not post attachments
- You may not edit your posts
-
Forum Rules
Bookmarks