Page 1 of 15 1234567891011 ... LastLast
Results 1 to 10 of 145
  1. #1
    service technician 100+ Posts hnami's Avatar
    Join Date
    Nov 2023
    Location
    tehran
    Posts
    115
    Rep Power
    2

    Altalink 80XX Series special Altboot method

    hello my friends
    anyone can ask a question for special Altboot problem
    I will answer your questions about Special Altboot and dlm encription message on your altalink device
    You can also send your questions via email to the address اhamednami1361@gmail.com and see the answer to the question in this forum
    goodlook

  2. #2

  3. #3
    service technician 100+ Posts hnami's Avatar
    Join Date
    Nov 2023
    Location
    tehran
    Posts
    115
    Rep Power
    2

    Cool Re: Altalink 80XX Series special Altboot method

    Friends, pay attention if you use full version Altboot
    1- You must make it clear to cws that this is a forced update and cws must ignore all the limitations of the previous versions and perform a forced altboot update. For this method, you must place a forced update command next to the dlm file, which is the method of creating it.

    Perform the following:
    1. Create a top level folder on the USB Flash drive named AltBoot (not case sensitive).
    Forced AltBoot only: Create a file named FORCED_UPGRADE inside the altboot folder.
    This is an empty file and must not have an extension; the AltBoot routine only checks to
    see that a file with this name is present. To create the empty file:
    • Open the AltBoot folder
    • In a blank area of the screen, right click and select “New”.
    • Select “Text Document”.
    • The name “New Text Document.txt” will be highlighted.
    • Type “FORCED_UPGRADE” (the file name is case sensitive) and press “Enter”.
    • A pop-up with the message “If you change a file name extension, the file might
    become unusable. Are you sure you want to change it?” will appear.
    • Click on Yes
    goodluck

  4. #4
    service technician 100+ Posts hnami's Avatar
    Join Date
    Nov 2023
    Location
    tehran
    Posts
    115
    Rep Power
    2

    Re: Altalink 80XX Series special Altboot method

    hello my friends
    i put a two file in cloud spase for you
    first file is a sd card image for altalink c8045-55
    secount file is a hdd raw image for altalink c8045-55

    https://1drv.ms/u/s!AnN361G6j6LzbRhA...1KluQ?e=bddutI
    https://1drv.ms/u/s!AnN361G6j6LzbtwI...GMuUQ?e=e7RKhx

    this images are active disk image "adi" file and you can write this images by active disk image software
    ask your questions in this forum

  5. #5
    service technician 100+ Posts hnami's Avatar
    Join Date
    Nov 2023
    Location
    tehran
    Posts
    115
    Rep Power
    2

    Re: Altalink 80XX Series special Altboot method

    Note that if the hard drive is healthy and has not been cropped or formatted, you do not need a hard drive image, but if one of the above cases occurs, you must download the swup.usb file from the Xerox "GSN" software website, which requires a username and password for this method. you have and only xerox specialists have access to it. I spent a lot of time to find this file, but I failed to find it. If anyone has this file, please share it in this forum.
    This file contains a bootloader that exceract the DLM file on the hard drive.

  6. #6
    service technician 100+ Posts hnami's Avatar
    Join Date
    Nov 2023
    Location
    tehran
    Posts
    115
    Rep Power
    2

    Cool Re: Altalink 80XX Series special Altboot method

    Despite the introduction and notification of the links of the above posts, does anyone still have problems with Altboot?
    Please reply your questions and comments in this forum

  7. #7
    service technician 100+ Posts hnami's Avatar
    Join Date
    Nov 2023
    Location
    tehran
    Posts
    115
    Rep Power
    2

    Talking Re: Altalink 80XX Series special Altboot method

    Quote Originally Posted by hnami View Post
    hello my friends
    anyone can ask a question for special Altboot problem
    I will answer your questions about Special Altboot and dlm encription message on your altalink device
    You can also send your questions via email to the address اhamednami1361@gmail.com and see the answer to the question in this forum
    goodlook
    I will correct the email address:
    Hamednami1361@gmail.com

  8. #8
    Technician
    Join Date
    Jul 2023
    Location
    Cairo
    Posts
    36
    Rep Power
    2

    Re: Altalink 80XX Series special Altboot method

    Thank you very much my friend you really helping me
    I have problem with alta c8035
    Keep rebooting i tried to forced upgrade but i field
    So I formated hdd and nothing happened so i formated sd and i got an image from another sd and the same problem not solve
    So if i tried the special boot sw well fix it
    Please if you have any suggestion tell me
    Thanks alot

  9. #9
    Senior Tech 250+ Posts
    Altalink 80XX Series special Altboot method


    Join Date
    Feb 2010
    Posts
    331
    Rep Power
    33

    Re: Altalink 80XX Series special Altboot method

    Quote Originally Posted by hnami View Post
    Note that if the hard drive is healthy and has not been cropped or formatted, you do not need a hard drive image, but if one of the above cases occurs, you must download the swup.usb file from the Xerox "GSN" software website, which requires a username and password for this method. you have and only xerox specialists have access to it. I spent a lot of time to find this file, but I failed to find it. If anyone has this file, please share it in this forum.
    This file contains a bootloader that exceract the DLM file on the hard drive.
    Correctemundo. I have the Special Altboot for the C8070. It consists of a 'swup_usb' file (83 kb) and a 'swup_usb.C8070' file (zero kb). I'm wondering if I could rename the latter to make it work for the C8030/35 and C8045/55 as well, since the file itself is empty.

  10. #10
    Service Manager 1,000+ Posts
    Altalink 80XX Series special Altboot method

    adriansto's Avatar
    Join Date
    Nov 2007
    Location
    Somewhere in Europe near Black Sea
    Posts
    2,242
    Rep Power
    71

    Re: Altalink 80XX Series special Altboot method

    Quote Originally Posted by Detonation View Post
    Correctemundo. I have the Special Altboot for the C8070. It consists of a 'swup_usb' file (83 kb) and a 'swup_usb.C8070' file (zero kb). I'm wondering if I could rename the latter to make it work for the C8030/35 and C8045/55 as well, since the file itself is empty.
    swup.usd is different for low, mid and high class of machine.

Tags for this Thread

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  
Get the Android App
click or scan for the Copytechnet Mobile App

-= -= -= -= -=


IDrive Remote Backup

Lunarpages Internet Solutions

Advertise on Copytechnet

Your Link Here