Xerox 700 127-212

[Samxerox]

Hi All.
All advice welcome.
Im just after aquiring an other 700 printer.
When I switch the bustled rip on it comes up on the engine as full functional but when I as the machine to print out a network report it gives me the error 127-212.

So far I have taken yhe efi card out and put it back in along with ram and the hd connections.

I also connected a monitor to the rip to see what would be displayed and it shows.
Ok Booting the kernel
Nothing more.

Im guessing could the os be corrupt.
If so where can I get the software disks since I do not have any and if they are expensive I will just keep the engine as a parts bin for my other one.

Also is it possible to print direct to the engine useing a usb cable.

Sam

[xcopytech]

How you know that rip is fully functional?
What you have on small led display on fiery?

[Samxerox]

How you know that rip is fully functional?
What you have on small led display on fiery?

I believe the rip could be correpted and that the os is not operating correctly especially since I cant get it to connect to command work station either.

The fiery displays I believe 00 on the led display.

maby im missing something like a cable issue but since I cant get it to link to command work station Im thinking the operating system is not working correctly.

[xcopytech]

Reinstall fiery system software

[adriansto]

Hi All.
All advice welcome.
Also is it possible to print direct to the engine useing a usb cable.

Sam

No.

[adriansto]

Hi All.
All advice welcome.
................ it gives me the error 127-212.
Sam

Look:

[Samxerox]

Reinstall fiery system software

thanks for the input were could i get the install usb file for the server that is a mmx model.

The previous owner didnt supply the required disks.

[xcopytech]

Mail me at xcopytech@gmail.com