Thanks Thanks:  0
Likes Likes:  0
Dislikes Dislikes:  0
Page 2 of 2 FirstFirst 12
Results 11 to 18 of 18
  1. #11
    Senior Tech 250+ Posts
    Join Date
    Feb 2009
    Location
    Rogers, Arkansas
    Posts
    466
    Rep Power
    35
    Make sure the heat sink fins are secured down on the processor. If it has popped off at any point this can keep the machine from booting due to it overheating the processor

  2. #12
    UBuildABook
    Guest
    I've reloaded the software and now the Fiery Server loads but it's now having another problem.
    Upon connecting it to a printer it displays a message on the LCD that say approximately: "Please wait... waking Printer"
    It stays this way indefinitely.
    I've discovered that the "NET" cat5 port doesn't recognize any sort of connection.
    Could this be a driver issue or is it more likely hardware related?

  3. #13
    Field Supervisor 500+ Posts
    Join Date
    Nov 2009
    Location
    Glendale ,CA
    Posts
    670
    Rep Power
    37
    sounds like you have the scan and net connectors switched ??

  4. #14
    UBuildABook
    Guest
    No, it wasn't a sink fan and it wasn't the Scan/Net connectors.
    I think the Net port is fried.
    I get a response from the Scan port but the Net port never recognizes when a cat5 is plugged into it.
    I'm the MoBo needs replacing.
    Is it possible to use a network adapter card in place of the Net port so long as I transfer over all of the Network Protocols and whatnot?

  5. #15
    Field Supervisor 500+ Posts
    Join Date
    Nov 2009
    Location
    Glendale ,CA
    Posts
    670
    Rep Power
    37
    Try and see

  6. #16
    Service Manager 250+ Posts
    Join Date
    Apr 2007
    Posts
    270
    Rep Power
    37

    Re: Fiery EXP250 wont boot up

    Hi,

    Can you email me the instructions 4-30 too? I have an EXP250 that worked then we shipped across country and now it will power up but will not boot.

    Thanks in advance

    Quote Originally Posted by xcopytech View Post
    code 05 mean that fiery motherboard is faulty.

    1. Power off/on the copier.
    2. Recheck all cables and connections.
    3. Clear the CMOS and power-up settings (see page 4-30).
    4. Replace the motherboard.

  7. #17
    tonisaco
    Guest

    Re: Fiery EXP250 wont boot up

    Hi all,

    I want to restore my windows XP embedded but when I want to boot
    from my Efi Fiery System Software v.1.1 DVD the booting process holds
    at:

    "LILO 21.7-5 Loading linux
    Uncompressing Linux... Ok, booting the kernel."


    I've tried many dvd devices and also I've done a dvd copy ...
    Same results ...

    Am I missing something ?!?!

    Thx

    Tony

  8. #18
    Technician
    Join Date
    Oct 2019
    Location
    Dubai
    Posts
    11
    Rep Power
    0

    Re: Fiery EXP250 wont boot up

    i have the same issue, dis u get any solution ?


    Quote Originally Posted by tonisaco View Post
    Hi all,

    I want to restore my windows XP embedded but when I want to boot
    from my Efi Fiery System Software v.1.1 DVD the booting process holds
    at:

    "LILO 21.7-5 Loading linux
    Uncompressing Linux... Ok, booting the kernel."


    I've tried many dvd devices and also I've done a dvd copy ...
    Same results ...

    Am I missing something ?!?!

    Thx

    Tony

Tags for this Thread

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  
Get the Android App
click or scan for the Copytechnet Mobile App

-= -= -= -= -=


IDrive Remote Backup

Lunarpages Internet Solutions

Advertise on Copytechnet

Your Link Here