Make sure the heat sink fins are secured down on the processor. If it has popped off at any point this can keep the machine from booting due to it overheating the processor
Make sure the heat sink fins are secured down on the processor. If it has popped off at any point this can keep the machine from booting due to it overheating the processor
I've reloaded the software and now the Fiery Server loads but it's now having another problem.
Upon connecting it to a printer it displays a message on the LCD that say approximately: "Please wait... waking Printer"
It stays this way indefinitely.
I've discovered that the "NET" cat5 port doesn't recognize any sort of connection.
Could this be a driver issue or is it more likely hardware related?
sounds like you have the scan and net connectors switched ??
No, it wasn't a sink fan and it wasn't the Scan/Net connectors.
I think the Net port is fried.
I get a response from the Scan port but the Net port never recognizes when a cat5 is plugged into it.
I'm the MoBo needs replacing.
Is it possible to use a network adapter card in place of the Net port so long as I transfer over all of the Network Protocols and whatnot?
Try and see
Hi all,
I want to restore my windows XP embedded but when I want to boot
from my Efi Fiery System Software v.1.1 DVD the booting process holds
at:
"LILO 21.7-5 Loading linux
Uncompressing Linux... Ok, booting the kernel."
I've tried many dvd devices and also I've done a dvd copy ...
Same results ...
Am I missing something ?!?!
Thx
Tony
Bookmarks