Thanks:
0
Likes:
0
Dislikes:
0
-
Senior Tech
250+ Posts
- Rep Power
- 0
03-380 on DC12
This DC12 has been coming up with a consistent 3-380 fault, if I bring out the IBT assembly and do some cleaning, it works, but only for a while before it comes back with the fault. Please what else can I do???
-
This Parts & Service manual can now be purchased for $11.77 and downloaded immediately after payment from The Internet's largest collection of manuals
Paul@justmanuals.com
-
Senior Tech
250+ Posts
- Rep Power
- 0
Thanks Paul, I have it already, what I need is someone's hands-on practical tip (beyond the service manual RAP) on this.
-
Trusted Tech
50+ Posts
- Rep Power
- 29
Have you tried replacing the TR0 sensor? If the sensor is good, is it possible that the belt is moving out of position? I had a similar issue with a DC2060 IBT belt, it is not the same type, there is no guiding strip in it, but anyway it might be the same problem.
Tags for this Thread
Posting Permissions
- You may not post new threads
- You may not post replies
- You may not post attachments
- You may not edit your posts
-
Forum Rules
Bookmarks