Hi. This morning when I turned on my DC3535 the display just sat there blinking quite fast, no content on the display at all. What could be the cause of this and how to cure it?
Thanks: 0
Likes: 0
Dislikes: 0
Hi. This morning when I turned on my DC3535 the display just sat there blinking quite fast, no content on the display at all. What could be the cause of this and how to cure it?
Anything guys? It just starts up with the backlight of the display flickering with no content and doesn't progress from there.
We've checked the AC PSU's for the print unit and the scanner unit as well as the MCU PWB, thery're all fine, changed the fuser unit as was suggested on Searchlite, still nothing. I'm sure this is a small thing and that makes it all the more frustrating that we can't find it.
Milo, you were onto something on another forum but I haven't been able to go there for some days, did you have any more ideas?
Sorted, turns out it was a short circuit in an interlock
good to hear. I will be in amsterdam on oct 2 to 5
a machine is only as good as your tech : source:screwtape ; the scary one
Reply With Quote
Bookmarks