Currently working on a Xerox Docucolor 240 that has an error code 075-210. I dont have the service manual so if someone could give me a briefe discription of this problem and how to clear/reset it I'd appericate it.
Currently working on a Xerox Docucolor 240 that has an error code 075-210. I dont have the service manual so if someone could give me a briefe discription of this problem and how to clear/reset it I'd appericate it.
This is code description>
Tray 5 Lift Up Sensor does not turn ON a spec time after Tray 5 starts lifting up.
075-210 RAP Tray 5/Bypass Lift Up Sensor does not turn ON within a specified time after Tray 5 begins to lift.
concentrate on tray 5 and if worse comes to worset replace tray5 dont even think of going to troubleshoot the boards.check if the lift up motor is working lets start from there
I have the eDoc for this model. Email me if interested.
you need an elevator motor for tray 5 ,the bypass tray
almost $200
white gear broken on the elevetor motor. you can order and replace only the gear.
Do you have the part # for the gear
It's not listed
Thanks
655N00367
Just press on with fingers or flat side of a flat blade driver. Flange out.
(Sorry to steal your thunder M4Y. Consider it a teaser.)
-I
Thanks
please send me the eDoc for Fuji Xerox Docu Colour 5065 if you have
Mail : futuremedia.ae1@gmail.com
Bookmarks