I have smudges or a little blurry print on paper. Replaced the separation/trans corona wires. Developer unit seems to turn ok and can not locate identical problem on the mag roller. Any help would be appreciated.
Robin
I have smudges or a little blurry print on paper. Replaced the separation/trans corona wires. Developer unit seems to turn ok and can not locate identical problem on the mag roller. Any help would be appreciated.
Robin
i don\'t know these machines very well, but i would suggest checking your opc/drum cartridge closely. make sure belt turns well and doesn\'t slip at all. thats about all the help i can give you on this machine.
good luck,
ray
i don\'t know these machines very well, but i would suggest checking your opc/drum cartridge closely. make sure belt turns well and doesn\'t slip at all. thats about all the help i can give you on this machine.
good luck,
ray
Bookmarks