Thanks:
0
Likes:
0
Dislikes:
0
-
Junior Member
- Rep Power
- 0
Re: Usb host to host communication failure on WC7655
Hello Guys, I know this Thread is quite old, but let me ask you. <br>
I have the same proble described above. Is there any chance how to recover or update SW without having IP adress? For instance via USB? What SW do I need? Current SW version is 040.033.53360. I have SW 04003353375_00_0.dlm. Thank you very much. What happen if I connect to motherboard PCI network card? or Graphic card? <br>
<br>
<br>
Does exist HDD Image? <br>
<br>
https://ibb.co/qC37C8q<br>
https://ibb.co/kGXcK7m<br>
https://ibb.co/sPyVW8Q<br>
https://ibb.co/qBG69HZ<br>
https://ibb.co/Rc7q8F3<br>
<br>
Thank you for any advice
-
Junior Member
- Rep Power
- 0
Re: Usb host to host communication failure on WC7655
Hello, My motherboard of Xerox Work Center 7665 is dead, but the HDD is ok. Are there any chances after replacing with new one, the printer will work again? Are there any difficult SW operations?
Thank you.
Regards
Jiri
Posting Permissions
- You may not post new threads
- You may not post replies
- You may not post attachments
- You may not edit your posts
-
Forum Rules
Bookmarks