Hi,
I need a ysoft card reader tool. If anyone can share, please.
Thanks
CopierNerd
Trusted Tech
Last Activity: 1 week ago
Joined: 02-23-2015
Location:
-
YSOFT Card Reader Tool
-
Thanks for sharing. In the flowchart it is mentioned that after starting the machine if HDD error code occurs C-D011 then go to the next step. In my case... -
I have tried a different USB 8GB, Sata recovery firmware A8 COPIED but it is still standing on 2 bars....Leave a comment:
-
If I disable HDD, and turn the machine ON it works fine. The only problem is its not taking recovery firmware. I have tried disconnecting, disabling HDD....Leave a comment:
-
I have tried A8 and B0. Both are stuck at 2 bars. HDD disabled, Disconnected. Machines work normally without any error but Sata controller firmware is...Leave a comment:
-
Thanks for your reply.
The machines are not in error state. Copy, scan, print works fine but for few hours and then C-D011 error occurs....Leave a comment:
-
I have these firmwares but none is working.
In my case machines are working. The error occurs after few days or few hours. Even if you left...Leave a comment:
-
Thanks Mate!
Its quite helpful. I am thinking in the chart its mentioned Sata Firmware. Which version of firmware is the sata firmware? I have non...Leave a comment:
-
Thanks for your reply.
I didn't try this option. I was installing used HDD pulled out from a working machine and testing in the faulty machine....Leave a comment:
-
Thank you for sharing such a valuable info.
I wasn't doing like this. HDD was attached and installed. Every time I try to update the firmware...Leave a comment:
-
Can you share picture?...Leave a comment:
-
I have tried many times. But it did not work. It does not boot and stays at 4 pillars. This code is driving me mad. Now I have 4 printers to fix with...Leave a comment:
-
When they say replace HDD, they mean brand new HDD or the working HDD from a working machine? If a HDD is working fine in another machine of the same...Leave a comment:
No activity results to display
Leave a comment: