Peter Zeravla
Technician
Last Activity: 3 weeks ago
Joined: 08-16-2016
Location:
-
Do you mean the one in the picture? If I remember correctly, that sensor is part of the Paper Exit Unit — so if that's the case, I’ve already replaced...Last edited by Peter Zeravla; 3 weeks ago. -
After replacing the ITB, the machine has been working fine so far.
So it seems that the ITB could have been the source of the problem.
...Leave a comment:
-
Thanks for the info!
Just to clarify, I’ve already tested the machine with a different fuser, a different Paper Exit Unit, and also swapped...Leave a comment:
-
Thanks a lot for the detailed explanation — it makes a lot of sense.
Just to clarify, I’ve already tested the machine with a different f...Leave a comment:
-
Thanks! I’ll make sure to check the SC history on the SP next time....Leave a comment:
-
I will give it a try with a new ITB. I guess I’ll just have to wait and see what happens, since it doesn't fail all the time.
Thanks....Leave a comment:
-
I don’t think that’s the issue in my case, as you can see in the photo I’ve attached of one of the Exit Units I’ve already tested. The problem...Leave a comment:
-
Thanks for the suggestion!
I actually tried swapping the Paper Exit Unit with one from another identical machine, and the issue remains exactly...Leave a comment:
-
Thanks for your reply!
I actually tried replacing the Paper Exit Unit with one from another identical machine, but unfortunately the problem remains...Leave a comment:
-
You're right. The error code is J024. I’ll upload some pictures showing the issue. In the one ending in _02, you can’t actually see the paper, but it’s...Leave a comment:
-
Ricoh MPC4503 - Duplex Jam at Fuser / Paper Exit Unit
Hello everyone,
I'm using a Ricoh MPC4503 and I'm experiencing a paper jam issue that only happens when printing double-sided (duplex). The... -
Ok, as soon as I’m able to work on it again, I’ll check your suggestions. For now, I’m just gathering all the information I can.Leave a comment:
-
Ok, as soon as I’m able to work on it again, I’ll check your suggestions. For now, I’m just gathering all the information I can.Leave a comment:
-
Thanks! Yes, I did see that image in the manual — but I couldn’t quite locate that part on the actual finisher when I opened it.
Maybe I missed...Leave a comment:
-
Thanks again for your reply — it helped confirm what I had already read before.
I had actually seen before that the SC720-71 error is related...Leave a comment:
No activity results to display
Leave a comment: