1. Plug the SSD the computer directly and boot the WinPE
2. CMD (Admin), Diskpart
3. Select target disk and delete all the partitions with override
4. Run the SSDProAdmin psid_revert -intelssd 0 and enter the PSID which can be found on the label
The PSID revert operation will revert the drive back to its original factory state.
THIS OPERATION WILL MAKE ALL THE DATA ON YOUR DRIVE INACCESSIBLE!
Intel is not responsible for loss of data using this tool.
WARNING! PSID revert will erase ALL the data on the drive!
Proceed with the operation (YN) Y
Enter SSD Pro Series PSID value.
The 32 character value can be located physically on the drive's label.
The value is case sensitive. Enter it as it appears on the label or scan the 2D barcode next to the value.
The value may appear as two values on multiple lines.
Enter a single value with no spaces or new lines.
Enter PSID
Error Selected Drive contains a partition. Remove all partitions to proceed.

What SSD do you have?

Thank you very mucht!