Hi everyone. I disassembled the transfer belt, drum units, developer units, fuser, and even the secondary transfer roller.
I cleaned the springs...
Benioffi
Junior Member
Last Activity: 2 days ago
Joined: 4 days ago
Location: Alicante
-
Yes, one of the solutions I considered was replacing the secondary transfer roller. But the problem is not on the second side of the sheet. Honestly,...Leave a comment:
-
The ghosted image that repeats is intermittent and appears in negative, which is why I ruled out the fuser as the cause. I replaced the drum with another...Leave a comment:
-
I think I’m going to disassemble and clean the drum contact areas inside the printer, and also check the erase lamp and its connection....Leave a comment:
-
I often use Katun drums and usually have no issues, but in this printer I installed an original Konica DR618K. I replaced it because the counter had reached...Leave a comment:
-
Negative ghosting
Hello. I'm new to the forum and need some help. I have a client with a Konica Minolta Bizhub C550i showing an issue I haven’t been able to resolve....
No activity results to display
Leave a comment: