svampekongen
Technician
Last Activity: 1 day ago
Joined: 2 weeks ago
Location: skjern
-
One of the 3 d1942999 was very tight and clunky and almost couldn't be turned by hand, and the other 2 were able to turn smoothly. So, I thought there... -
Hi blee, the jam code is j098. I found out one of the servos was broken in that area, so I have ordered a new one. Hopefully, that will solve it.Leave a comment:
-
Hi Giuboss,
Yeah, it seems to jam from all the paper trays, although it doesn’t really feel like a typical jam. When I open the right drawer,...Leave a comment:
-
Hi Anothertech,
Thanks so much! I went through the PTOP manual and saw how the polygon motor should be connected. I also noticed that the CN556...Leave a comment:
-
[QUOTE=anothertech;n1622873]
Hi Anothertech,
Thanks again for your help. I received the new motor and swapped it in, but unfortunately,...Leave a comment:
-
Hi Anothertech,
Since I had to disassemble the entire color station to get to it, I thought: why not just buy a new motor instead of swapping...Leave a comment:
-
Thanks a lot i ordered a new motor i will let you know how it goes. 😊...Leave a comment:
-
Here is another picture that's probably better 😊...Leave a comment:
-
Hi anothertech,
Just to be sure it's these ones here right?...Leave a comment:
-
Hi anothertech,
Yesterday I tried to replace the FU3 fuse, but had no luck. I'll try going through the other fuses as well. Thanks!
...
Leave a comment:
-
Hi Davel,
Thanks for the suggestion. I’ve been looking through the manual, and from what I can see, it’s number 12 that needs to be replaced...Leave a comment:
-
Ricoh Pro C7100 Error Code SC202-01
Hi everyone,
We recently purchased a used Ricoh Pro C7100, and I’ve just finished assembling it. However, when I power it on, I’m getting the...
No activity results to display
Leave a comment: