500 results in 1.4349 seconds.
-
Kyocera 7003 weird mark in half tone
Howdy folks, got a 7003 that makes this jitter in half tones. It does not appear when printing a U089 half tone page but it does appear when printing... -
Ricoh MP 6002, MP7502, MP9002 Family Series, Lights or low density Copies or printing
Hello, has anyone finally found the cause of this failure? Some say the ID sensor, others say the machine filters, others change the developer unit and... -
TASKalfa 308ci w/ Registration marks on prints
Good morning all!
I've got two 308ci at my office (I'm an end-user now), both almost new, and one of them (the newest one, no less) is showing... -
308 drum and dv life
Howdy Folks,
Im still pretty new to Kyocera but ive been seeing a trend that the 308 drums or the dv units don't make life. Usually not... -
731 CDW fuser parts - source?
Hello all thank you again for your help so far. I would like to be able to purchase individual parts for my 731, not a whole fuser assembly. Is anyone... -
Konica Minolta Bizhub C258 Mono / Greyscale Image Quality
I have a copy quality issue on a bizhub C258, only on the greyscale / mono prints
There was a mark on the transfer belt initially so I changed... -
Poor Quality
Hi Everyone,
My Canon c5030i machine has printing poor quality of color copies,
Here with I have attached the picture of test page,
...You do not have permission to view this gallery.
This gallery has 1 photos. -
Sharp BP B540WR
I went out on this sharp BP B540WR. It makes a thick black line when scanning from the Glass and the ADF. Internal prints are fine as you can see there... -
C227 Producing Thin White Lines
Hello Everyone,
I am after a little advice on an issue I am having with a C227, I am getting thin white dotted lines come out on Cyan &...You do not have permission to view this gallery.
This gallery has 2 photos. -
Quality problem km c258 magenta color.
Hi guys
I have a c258 with a quality problem in the magenta color as you can see in the samples. The magenta unit prints with multiple white dots,... -
BH C368 grabled/noisy print
Hi there,
This C368 is prionting attached sample print. To my experience the MFP board has gone bad. Any thoughts about it and what's reason for... -
Bizhub c308 - Yellow Background
Hi All,
We have a c308 that has yellow background on prints, I've tried a few things, swapped out the yellow DV unit, Yellow DU, charge Board... -
MX-C303 - Scan Quality
Hello
we have a MX-C303 with a smudgy scanner quality.
Print no issues, If I scan (300 or 600) the is a little smudge on file, and... -
Bleeding colours when copying or scanning on HP E786
Hi all,
I have a HP Colour LaserJet E786 that produces a colour shadowing/bleeding when copying or scanning from the ADF. I have seen two... -
Bizhub C258 rainbow corner when using main scanner glass 11x17
So I have a unit that when you use the glass and copying/scanning 11x17 you get a rainbow added to the lower right corner. I have cleaned the glass inside...
