500 results in 0.1035 seconds.
-
WC 6655i Scanner Fault
It will not Pull paper thru the ADF Unit. Is this point at the ADF or Scanner? Thanks in advance I typically dont work on these. It also saysScan and... -
HP M880 ADF gives *horizontal* line!?
This one is a little bit special; When scanning from the ADF the output has a horizontal line (ie, not a vertical line). I don't even understand how this... -
RIcoh MP 402 ADF bending originals in corners and prints are cut off on the left
Hello, I went on a MP 402 call yesterday and there are two problems:
1. The ADF is bending the originals in both of the leading edge corners.... -
Kyocera 3553ci detect documents only as 11x17 ledger, wrong original size detection
Copier was hit on top ADF during move but since when making copy or scan the machine will detect letter size paper (A4) as ledger 11x17 (A3). Cleaned... -
FM1-T423-000 adf sep roller issue
I've had this issue on a couple DXC58xx series adf's now. Customers call in for noise and misfeeds in adf. I arrive and find that the adf sep roller... -
Konica C558 noisy scan from ADF
Hello everyone
I have a Konica C558 that emits strong gear noises that jumps during the scan from ADF
The jumping gear is the one circled... -
Bizhub c454e ADF 4x6 stack scan // Getting stretched section on 1 of 4 prints or so
Hi all,
Doing a favor for my mother in law. Has TONS of 4x6 glossy lab photos. Just old family stuff. I've been running them through the... -
c3350i adf won't reset
Anyone see the adf on c3350i not reset for next job? feed tires stay in down position. Machine has under 10k on it.
I did notice if we lift adf... -
Bizhub 450i Blank prints when original runs through ADF
I have a KM Bizhub that will print off the glass but when the original runs through the ADF the print is blank. Rear of page prints when duplexing. ... -
iR 1435 ADF jamming
Not so much jamming but it is difficult to unjam. I feel this should be simple, I have over 30 years experience, mostly on Canon, but this little POS... -
MFC-L6900dw line when using ADF
No, it is not the slit glass! Yes the firmware is up to date. It only has a line when using the ADF and does not do it when placed on the glass. On the... -
DP-7160
I have a brand new 3554ci with a DP-7160 installed (already delivered). The ADF doesn't sit flush so it doesn't think the ADF is closed all the way. ... -
Kyocera CS-508ci Vertical Black Lines(moving) When Scanned via ADF
Have a 508ci leaving black lines when scanning through the ADF. Slit glass is cleaned. Doesn't do it when copied via platen glass. As you can see the... -
Bizhub C458 ADF and flatbed copies not correct
I have a C458 that when scans/copies are done via ADF or the glass have a "tire" mark on the top of the page. This does not happen when printing.... -
Diamond pattern background when using ADF
Hello people... Never saw this... Just got a call from a client... On her MP4002, She said, only when she uses the ADF, She gets that Diamond background...
