This only occurs when paper passes thru the machine in the letter R or legal position.
...
32 results in 0.0171 seconds.
-
Sharp ARM 277 Streak. Image attatched
-
DSm660 "Please Wait"
I have a nashuatec DSm660 showing in the display panel "please wait" eventhough I replaced a new HDD...anyone can experience this? please share... -
DC-12 "insert coin" message
Hello, I recently purchased a DC-12 machine, and it says to insert coin, I would love to, but alas, the coin operation unit did not come with the machine,... -
IRC4085 Jamming at finisher inlet
Getting finisher jam code 0109. I'm out from office for a couple days and could use some help on this one. Machine works fine with finisher disconnected,... -
c3170 - E00020-0081
I have a number of c3170s that keep on giving error code E00020-0081 with annoying frequency. I keep cleaning the sensors, and have replace the drum,... -
Strange problem KM-8030
Hey guys,
This is a strange one...KM-8030 only jams when using the EDH paper exits machine and jams (finisher attatched j-81 without finisher j-60).... -
di 3510 lines on copy. help....
just noticed this yesterday. copier is a trade in that I did not notice before. lines on copy. I have attatched pics. I swapped drum. no change. ... -
mpc 4500 df jams j053
i am having problems diagnosing a jam fault on a ardf 3010 attatched to a mpc 4500 it constantly throws up j 053 jam codes ( seperator . off) .have replaced... -
MP C2500 Firmware needed
Hello, dear!
I'm new here and need some help.
One of our MPC2500 had the SR790 bridge, but after it has been removed, the machine... -
Part number needed c6500
I am looking for the part number of the back up shaft to the decurl roller on the paper exit guide section on a 6500. It is on page 73 of the parts manual... -
C350 with FS-601
Having a strange problem - We have a C350 with a FS-601 finisher. When the finisher is hooked up, the machine will not duplex. When we take the finisher... -
Toshiba LCT - HELP!
I have a new (last year) 55cpm Toshiba with an external paper source for high volume. It ran over 300K carefree copies over the last 8 months. Then the... -
konica 7145
hi guys can any body help i want to know if a 7145 can copy 10k pages a day?thanks -
Canon IR 550 E060 error code?
My Canon IR 550 is stuck in EO60 code.
"turn machine off & back on".
I follow instructions. Same error keeps coming back.... -
Bizhub 200 B/W copier
1/4 inch black line on copy, change drum and blade did not repair the problem, look at the develop unit, the black line is coming from the mag roller,...
