Hello,
Do anyone know how to disassembly cleaning blade on transfer belt unit of these models?
Thanks a lot.
221 results in 0.0425 seconds.
-
C3320i / C3350i transfer belt unit
-
Kyocera M3645 Drum Kit
Does anyone know of a rebuild kit for the drum unit (DK-3172)? Does anyone have an economical source for this product? They seem to be quite expensive... -
Canon C75xx transfer blade plate p/n
Hello,
Would someone please be able to give me the part number for the transfer blade plate for the IR Advance 7500 series? It seems FL3-4920-000... -
Cyan and Magenta Developer Loss
C-364e: Magenta Dev Loss, new developer, new drum and blade, TCR: -1 doesn't help, Air ducts clean as new one
C-224 : Cyan Dev Loss, new developer,... -
bizhub C450i dark on back side
Hello,
One customer reported some black lines on printout.
We checked the problem due to cleaning blade of drum unit K, after we replaced... -
Ricoh bk5010
Does anyone know how to adjust the blade on these?
Was trimming well but has started to trim only half the booklet, blade has only done less... -
Image Runner Adv. 6555i- CQ
We replaced some of the PM parts and the machine is putting this streak I guess you can call it on pages. Drum blade, primary corona assembly, Transfer... -
Konica Minolta Bizhub Pro 1051 foggy/ghosting
Hi all,
i have problem with ghosting, after everything replaced from OPC DEVELOPER,Cleanig Blade,Corona, i have the same issue.
PLEASE see... -
DK-5195 Marks
Has anyone figured out a way to keep the DK-5195's from leaving marks on the rear frame side ? It almost seems as if the drum pulls away from the blade... -
MPW 5100
Hello i have a ricoh mpw5100 runs fine for a while than has sc406 and add toner problem i replaced id sensor drum drum blade and dv still after runs for... -
WC6027 cleaning blade
Hi guys,
I know that nothing from developer -belt assy on 6027 is spared but it looks like rebadged IOT. Do you know who is the origin of this...... -
mx6240 cleaning blade install
having trouble removing the dl unit to access the drum blade the book shows lifting up on the end and sliding it off the 3 hooks but it wont budge at... -
Disassembly DK-5195 drum units
Any instructions or videos on how to disassemble the drums for 307ci? I want to clean the drum blade and cleaning lamps due to streaks.
Thanks -
2th broken transfer belt
Hi,
anyone had similar problem like me?
I have 2 broken transfer belts with maximum 10k copies…
it is an C6500 machine... -
IU712CMY rebuild
Has anyone been able to source drums,blades and PCR to repair these since they are in short supply? Lines on PCR from a failing blade.
