HI,
Third time fuser has blown after only 2 to3 days. I replaced the original fuser after code appeared unaware that I had futher problem.Customer...
99 results in 0.0228 seconds.
-
OKidata c5500/Fatal Error 980
-
reader controller burnt (iR3225N)
Hi everybody,
Canon iR3225N copier
Error code E248 , reader pcb was burnt, I removed that pcb without P Print. if i put new... -
What is the record for accordian jams pulled out of the fuser?
Everytime I get a call for "The copier keeps eating my paper", I find accordian jams in the fuser.
After years of pulling multiple sheets... -
i need your assistance on RZ 200 EP risograph duplicator
My name is emeka am the chief engneer with SHARP DIGITAL AGE TECHNOLOGICAL SERVICES LIMITED a fully registered company in Nigeria.
I havea -
A guy walks into a bar...
A guy walks into a bar with jumper cables. The bartender says, "You can come in, but don't start anything" -
KV S3105C Scanner U13 error...sensors check good, runs about 2 hours!
I am thinking this is probably a long shot, but any Panasonic (or otherwise) technicians who have any experience with these scanners? NOW cust. also... -
-
canon clc 4000 need a part number
i need part # for harness that connect all the thermistors and sensors on fixing assembly
it burnt out if some one know the part #please let me... -
Copier Tech Rate Per Hr.
I'm looking to get some work done on an Sharp Machine and the price per hr from two companys are at 150.00 per hr that I got quotes on.
This... -
MPC 6000
Has anyone had a MPC 6000 showing the jam path of the entire machine on the screen with no specific location of jam. It also gives a code 001. The firmware... -
MPC3000 with a couple of problems
I've got a Ricoh MPC3000 with a couple of problems. They don't seem to be related, but I'd like to know if any of you guys and girls ever got any of this:... -
H4 IN SHARP 53/55 series
This error occurs when the heating temperature in the fuser unit is not reached during warmup or operation time.
Causes
- Heater lamp disconnection
-
bizhub c352 error
Dear allI tried to upgrade Firmware for bizhub c352 , using kingstone CF compact flash 4GB and using Firmware Imaging Toolkit 2006.... -
Error code 732
I am working with iR 3225 machine,the problem is that after replacing the reader controller pcb the error code E732 is displaying.If I off the reader... -
canon ir 4570 fax dead
Earlier this week I went out on this machine for blank display, after removing all connectors on all boards in back and still had issues I exposed the...
