I need to upgrade a Toshiba/Lexmark e389cs/ XM4140 to a Toshiba new e2525AC. Two completely different operating systems.
There are about...
21 results in 0.0248 seconds.
-
How do you print off the address book on a XM4140?
-
Fuser kits
Is there any difference, other then gear placement, is the Sharp fuser rebuild kits? They seem to be completely interchangeable. -
Completely suspend job in error state
Hi,
I use PaperCut software and I wanted to know if it is possible to suspend a job completely which got stuck due to running out of paper,
...Last edited by gavrielx; 01-14-2024, 04:03 PM. -
Kyocera TaskAlfa 352ci. Aligment colors
Hi,
Had to change the ITB unit completely because of the noise that was coming from this unit.
After the replacement the colors on... -
-
BH-C-284e, scan name
BH-C-284e, when using scan>e-mail, forgot how to change the scan name for PDF's from "SSCANxxxxxxx.pdf" to else. Did it often, but forgot... -
HOSTAKI started a topic [Electrical] Xerox Workcenter 3220 scaner reads nothing after repairing broken line on cable ribboin XeroxXerox Workcenter 3220 scaner reads nothing after repairing broken line on cable ribbo
https://youtu.be/61I8seU_nTg
continuity tests where done while I had the scanner moving manualy, to check if repair was done properly or... -
Phaser 7100N - Toner not being completely fused to paper
We have a 7100N that seems to not be completely fusing the toner to the paper. There seems to be a ~3" wide band down the center of the page where... -
HP LaserJet M608 Tray 1 Disable
Is it possible to completely disable Tray 1?
I've googled this and all I get are HP Reps skirting the question offering workarounds (with... -
Waste disposal survey
Hi everyone,
I am currently in the process of writing an assignment on how waste generated by copiers/digital presses are managed. I have... -
Waste disposal survey
Hi everyone,
I am writing an assignment on how digital printing waste is managed. I would appreciate if you could fill out this short survey... -
Kyocera machine change its numbers automatically
I have a 5501 machine in the U140 program, it changes the (MagDC) to 226 and the correct number is 180 and every time I install on the number it changes... -
HP M506DN Parts help?
I've been to look at a HP M506dn printer for a customer and the Bypass Tray assembly or Tray 1 (I think), its the tray that opens down. Anyway its snapped... -
MP C307 SC121
Hello together
Have the problem with this SC code. The error always comes when starting the device. Scanner does not initialize and the lamp does... -
oki es3640e major printing faults
we moved an es3640e that was working fine. After it was moved I tested it and there were big problems, the pages had a solid block of cyan for the background...
