Search Result
Collapse
58 results in 0.0286 seconds.
Keywords
Members
Tags
-
-
estudio 5540c doc feeder not recognized
Gentlemen
I am a Konica Minolta tech so I don't work on Toshibas very often. I have replaced a drum and transfer belt successfully. The... -
MXC357F - 126.11A error code
We finally tried a couple Sharp-marks. The first one throws this error intermittently when waking from sleep mode. The hotline's suggestion was to request... -
BH-C-284e, C4101
Have a BH-C-284e in the workshop popping error code C4101, Polygon Motor rotation trouble. Machine was working but since it came in extremely dirty I...Last edited by Hansoon; 02-25-2022, 11:24 AM. -
MX3050 and newer electrical connectors
I have a silly question regarding the 2 wire connectors on these models that go to the paper lift motors and the clutches. I have a hard time releasing... -
Sharp MX3070 connector install packages
Can i get someone who has access to the Sharp AIP Connect program to get me the connectors for use with the Phoenix MX3070 machines? Thanks. -
RJ45 Pass Through Connectors
Over the past several months I've made a lot of ethernet cables and I've gotten pretty good at putting on the RJ-45 connectors but it's still a pain in... -
Lexmark MS810dn
Hi. I have a Lexmark MS810dn with a flashing (or blinking) display. It prints fine and the keyboard does allow you to navigate. I did re-seat all the... -
Flashing Op panel on Bizhub 3320
The entire Op panel assembly has been replaced so far and all board connectors reseated. The machine is functional, but the op panel is un usable, it... -
e-Studio 856, no display...
Hey guys, OK, so the fan motors run, but that's it. The display is totally black and the power button keeps flashing. Removed and reseated NVRAM and most... -
Canon LBP5460 Error Code E0078-0001
I am having an issue with a Canon Color LBP5460 Printer. It will print 3 or 4 prints and it errors E078-0001,
Tried replacing drum and fuser... -
Ricoh MP 2851 SC 672
I have a 672 code on a Ricoh 2851 after a long please wait condition, tried reseating connectors to no avail. Any ideas would be greatly appreciated... -
MX2610N DC Power Supply swap w/mx2640 ??
Brown-out killed DC Power. No PWB in stock, anyone try this swap? P/N's are different for sure.
All connectors are the same, I've hooked up most... -
Kyocera TA3500I error 7401
Have a Kyocera TA3500I that runs perfectly for a day or two with a brand new developer unit and then faults out with a 7401 error.
Same machine...