132 results in 0.0393 seconds.
-
C458 Solid Vertical Color Bands
Have a C458 putting solid vertical bands on the prints, see attached. So far it does it with K and C and just started with M. It starts off feint then... -
Very strange skew issue, 4525
Ok, now THIS is weird. Brand new out of box 4525. NO box damage. The slit glass was cracked, but no other damage.
Machine set up fine. After... -
C-405 light through ADF
Tech just called me saying he has a C405 with "light copies" through the ADF.
Off the glass, images look fine.
He did a software... -
Out of the box issue Versalink C7030
Out of the box problem with a C7030. Setup as normal, but this is what I get on the startup page.
Swapped yellow/black drums,... -
Lexmark XM3250 LCQ on one side
So was curious if anyone has run across this. We've had a few of these printers that we've sold brand new out of the box that look great on initial setup.... -
Canon IRAC 5051 copy quailty just goes light in middle of printjob
I have a Canon IRAC5051 that changes to a lighter print in the middle of a print job. All colors fade out at the the same rate. pq10 shows good quality... -
Oce pw365 intermittent 3" void cross feed
Oce pw365 with 21k linear meters, exhibiting intermittent 3"(76mm) void cross feed, otherwise CQ is excellent.
recently replaced charge assy.... -
Kyocerta KM5050 scans only half the page - HELP!!!
Maybe you can help me. I just purchased a used Kyocera KM5050 unit. It prints well when on the network, but all scanned and copied items come out with... -
IR 2525 Light/faded prints
Good morning, everyone! As the title states, I have an IR2525 that is producing light prints. I have attached an example. The customer reported that the... -
C3220 dark colors
Hi all,
It's been a while since I've worked on one of these Canon C3220s.
Black drum was replaced and now all colors are dark (from... -
What is causing this?
This is on a Copystar 5500i.
Only happens off the plate glass. Scanning through the document feeder comes out perfectly. I have asked around... -
Ineo +224 Printing Blank Pages but prints gradation patterns ok
Hi all, hopefully someone can point me in the right direction. Customer has an Olivetti MF-222 / Ineo +224 which halfway through printing a large job... -
Lexmark T652 horizontal void on left side of paper
Hello all, I have a Lexmark T652 that has an issue of horizontal void on the left side of paper when printing no set pattern.
Changed toner,... -
Bizhub C280 Double Image
I have a problem with our client's Bizhub C280 machine that is producing a double image. There are no error codes on the machine. What I did so far was... -
C7000 Skew
Hello everyone. I have a customer with 3 C7000 print press. 2 of them are printing with a skew out of all the trays of the machine and the PF-602. I can...
