Search Result
Collapse
16 results in 0.0229 seconds.
Keywords
Members
Tags
-
c6500 paper crimp in the middle of 11x17
Doesn't happend all the time but in 20% it is like that, do it only to 20-28lb 11x17, checked all rollers, seems to be good. Can anybody help me. Thank... -
need your exp on this matter
Upgrading a 3O50 to a 3O0i, they have a coin op and a lTS cardreader(really old).
As I'm transfering the key counter harness over, i encountered... -
canon ir7105
have a problem with copier.I have a black backgraund , but i still see a text masege.
the backgrund is very black. time to time the copie is normal....Last edited by ivc; 10-25-2010, 12:40 PM. -
Taskalfa 250ci fax problem..
We installed a new machine with a fax option. It didn't work - and we checked that the line worked OK.
Ordered a new fax unit (with the mem thingie),... -
MXC311 fax error code
We have an MXC311 with a fax kit which is according to the customer showing (error code fail 19(0015)) when receiving faxes. I have found the report codes... -
Reset Unit 2 - IR 5000 at power up
By opening the front cover, then closed again the error code clears and machine runs
But every time customer turns it off and on it says reset unit... -
Canon IR3300i Top Feeder Not Being Recognized
Hello guys. Appreciate if anyone might recommend possible causes for the Canon IR3300i top automatic document feeder not being recognized. Unit had... -
Stapler issuse
I have a MX-B401 with the MX-FN 12 finisher, the little one that slides into the cavity of the machine.
less then 10 K on the machine, and the stapler... -
SR861 Booklet
Hi guys,
i have a problem on SR861 Booklet Finisher. When it staples on booklet type some of paper is not settled and some are. I allready cleaned... -
iR C3220 full auto gradation adjustment problem
while trying to perform full auto gradation adjustment
the machine will print out the 1st test print
same procedure, I place... -
E197 Winner! or this tech is going to go insane!!!!
I have a 7086 that gets a e197-0000 code after about 100 copies. I noticed that after about 75 copies there is one copy that has the trail edge of the... -
550i paper being crimped
Hi I am very new to this board, I have a FX 550i that is both printing and coping but there are two marks coming through on the pages, one is a half... -
B250_350
I've got a B250 in the field with about 750k copies on. It suddenly doesn't want to detect the Duplex unit. Tried all the boards, upgraded F/W to latest... -
canon 8530
after few copies a paper stucks up at the bottom of the drum, i changed the transfer/separator assy,changed the corona wires on pre transfer and the... -
ir7086 interminent blank copies
i have to go help a fellow tech tomorrow who is getting interminent blank copies on a ir7086 he has changed all the corona units and updated the sys soft....