31 results in 0.0228 seconds.
-
Xerox v180 048-310 or 048-311 decurler cam position fault
I'm experiencing a recurring fault for the decurler module cam shaft. I can power off the machine, manually adjust the cam position to 90 degrees clockwise... -
Fuji Xerox 700DCP Error 012-100 C Finisher. Paper jam.
Fuji Xerox FX 700 DCP with C? finisher. Intermittent error 012-100 now constant error.
Machine passes paper without finisher attached.
Have... -
Fuji Xerox 700DCP Error 012-100 D3 Finisher. Paper jam.
Hi legends. 1st post. here goes.
Have a FX 700 DCP with D3 finisher. Intermittent error 012-100 now constant error.
... -
Versant 280, error 076-101 not found?
Only does it every 800-900 copies. Can't locate the RAP in the machine, GBC punch, decurler,
Inserter, finisher, HCF.
Any ideas? Looks... -
xerox 700 077-311
Hi New to the site and thank you for any help you could give
xerox 700 with constant 077-311 error and vibrating from nip roller on warm up
... -
decurler MPC 651
Hey,
I have a lot of paper jams through the decurler in an MPC651. Someone a solution?
Thanks,
Patrick -
Xerox 700 D C P - 10-342
I have a xerox 700, giving error code 10-342. It supposedly means Decurler Cam Upper operation failure is detected.
I've unplugged / turned off... -
Image press C1+ E00009
I have a machine that will has a E0009 code as long as i keep the fnt door open other wise as soon as i shut the door the machine CB on back will... -
Pro C5110s -Accessories not visible
None of the finishing options: punch, Finisher, show up on the OP Panel. Jams at the Decurler. They have power. -
where is The decurler unit of image press c1
can anyone help me? i don't know where is The decurler unit of canon image press c1?
-
Imagepress c1 jamming when face down printing a3 /sra3
help got a problem on a lovely c1 !
when printing on a3 or sra3 stock face down print it has a kink in the page about 3 quarters down... -
-
C5500
i have a C5500 jamming in the reverse exit section, it prints OK when doing face-up prints but whenever a duplex or face down print the paper just sticks... -
Canon Ir 3025 Fixing film Temperature controlling
Hi Everyone!
I need help. I have a problem with a Canon Ir3025, the paper is slightly damp, so as it comes out from the fixing film it is curly.... -
Konica 7165 paper jam in fuser after 75 pages
Hey all
i have a konica 7165 that i am running but i have a problem, after around 75 pages i get a paper jam in the fuser, this is with A4 paper...
