128 results in 0.0322 seconds.
-
taskalfa 5501,5500
repeated dots on copy because on charge roller at some points the surface looks like pressed and deformed . it happens frequently on this series... -
mpc 2004 fusıng sleeve
In the paper-paper shooting mode of the mpc 2004 copier, the upper roll of the oven is constantly deformed in 15-20,000 copies. anybody have a suggestion?... -
Saqvin 4035
What would cause intermittent lightness in the center of a print from a Savin 4035? The customer first told us that this was happening on both copying... -
teckat started a topic [CQ] imagePRESS C1_Serial Numbers Affected:TKW00001 to TKW0109-Deformed Pressure Platein CanonimagePRESS C1_Serial Numbers Affected:TKW00001 to TKW0109-Deformed Pressure Plate
imagePRESS C1/Serial Numbers Affected:TKW00001 to TKW0109
Technical Publication covers measures to take to minimize light images which can... -
Toshiba 451c dev unit problem
Color developer unit problem. Toner and developer adheres to the rear side of mag roller making ~1 cm round bump which contacts with drum and starts making... -
kyocera fs-1018mfp--- headache
hi every one
it's my first participate
i have kyocera fs -1018 for 6 year ,and in this period it's work very
very well intil one week... -
3025 and 2045 problems
Hi to all,
on friday i install a new pcu (1027) in one 3025 machine that is 200km from my town and all was fine. today client fone me becouse... -
Mpc-3000 weird pattern
I have this issue on the first copy intermittently, i have no idea help!... -
E-Studio 28 constant jam after warming up
Hi all,
My customer's machine goes into a constant jam that can't be cleared, after it's been on for about 10 minutes. The jam is showing in the... -
imagerunner 3570 Light Copies/prints on OP Side
For some odd reason the pages coming out are lighter on the OP side than on the NON op side when exiting. New drum, fuser, transfer roller, cleaned it... -
ir4570 printing complete black pages
Have an issue with ir4570. When printing, once in a while the machine prints a few completely black pages, not even blanking edges are visible. Problem... -
Ricoh CL7200 duplexer jamming
Hello,
Bellow is a problem Ricoh's own technical service seems unable to handle
Hopefully there are more skillful persons on this forum...
-
Paper jam error with no paper jam - where do I look?
My IR 550 prints five to ten copies before it quits and tells me the paper is jammed in the folder. I am printing booklets (11 x 17 into 81/2 x 11).... -
Sharp Ar M208 pulling developer
Sharp Ar M208 black and/or faint twisted ribbon like lines or thin bands on both sides of copies
I have a sharp AR M208n. Pulls... -
Ir5570 e840-0001
Problem is definitely in upper unit. Replaced sensor, brackets dont seem bent, and shutter seems to rotate fine. Switched upper unit with another machine...
