Xerox DC700i Error 024-983
I need help resetting error code 024-983.
The booklet finisher was full and the message remained. ...
29 results in 0.0179 seconds.
-
BizHub C284e ghost duplex jam 14
I'm looking at a Bizhub C284E that upon power it comes up with a jam 14 in the duplex area. The fuser lamp doesn't come on and the delivery assembly or... -
Any way to transfer Department IDs from Canon 6055 to DX 6860?
6055 are legacy devices and don't do the full export so was looking if it was possible to do. I've found something called Device Information Delivery... -
4235 Noisy Delivery motor M10
This is motor 4 in part check. M10 delivery motor. Noisy and high pitch squeak? Anyone solve this yet? It will be awhile before I can get to this. -
Need refurbed exterior panels
Does anyone have a recommendation where to buy front doors and exterior panels. My recent delivery included 3 Ricoh MP-C3503's and they all have broken... -
iRA 3720 Duplex jamming
Good evening,
I have today unboxed a new iRA 3720 and have been getting it ready for delivery tomorrow.
The problem is that it will not duplex... -
Delivery Truck/Liftgate
A while back I decided to purchase a Tommy Lift for our delivery truck. Unfortunately because of covid (or so they said) it's been on backorder for about... -
4235 wont update firmware. says check delivery server
every time i go to service mode trying to update firmware the machine displays
[failed to connect to delivery server ,check delivery server and... -
Canon iR1435iF Jam 014C
Strange issue with a machine giving 014C jam code. I've been to site 5 times, and I've seen it jam, but it would just stop jamming and run fine for a... -
TaskAlfa 406ci. Installtion
HI,
Is there an installation/service manual available for this machine, need to setup/pre-install for delivery . .
would appreciate... -
E553-8001-2 / Staple Finisher-Y1
Collected this finisher from the customer on Friday and brought it back to the workshop.
Of course I have what is says below as a starting point.... -
Canon 2800 needs help
I have a canon 2800 that gives a stationary jam after paper leaves fusing unit but before it reaches the delivery sensor. The paper stops in the middle... -
Light print Nashuatec Mp c3500
Hello everyone, I have a problem with the Nashuatec Mp c3500 photocopier. Everything worked fine, after delivery to the location the print is very br... -
Wanted: Sharp AR-M237 Paper Delivery Exit Assembly - OR - Delivery Roller Holder
I have a client with a Sharp AR-M237 that needs a replacement for a crumbling -
Paper Delivery Exit Assy:
CFRM-0038RS99
CFRM-0038RS98...
