33 results in 0.0272 seconds.
-
Dead C364
Hello guys. Got a C364 that received a lighting strike through the customer's network (at least that is what I figured since almost he's entire network... -
33.05.23 on HP PageWide P77940
I'm getting error 33.05.23 on a HP PageWide P77940
According to the manuals, all you need to do is to restart the machine it will clear itself,... -
SC 665-02 (MP C2504ex)
Guys, have you encountered this kind of error? Updating the firmware is not possible. The SP mode becomes Chinese language. I already replaced BCU and... -
LCT 4030
Can anyone tell me how to disconnect the LCT 4030 from my 6502? I can see the bracket but can't get it disconnected?
Any help appreciate... -
Stuck on bars
Hi guys, I have a Bizhub 4050 that gets stuck on the bars after powering it on. The engine runs before, but the panel still shows the bars. is there any... -
mp c4503 blown fuse fu102
think dc power supply is bad, what made it go bad?
customer said it was tripping their breaker in the panel box.
when i got there,... -
Bizhub C652 is permanent disconnected
Hi
Our Bizhub C652 is not connected, but are available on web browser by IP.
If we print a page, select repair printer, the job is... -
-
Konica Bizhub 363 Says ready to copy then won't print
The scanner will scan the document then comes up with print error on the Job log. I reloaded the firmware formatted the hard drive and unset then disconnected... -
Konica 7085 IP602 with bad KN306 network card
My IP602 has KN306 network card that quit. It has the green light which gives hope that it can be recovered. The proceure calls for using IPX recover... -
OKI ES3640 Does not recognise finisher
It seems a tech disconnected the finsher while working on the machine. Since reconnecting, the machine does not see the finisher. I assume he switched... -
heavy noise on HP7815A
Can anyone help on this. The machine gives a very loud gear grinding noise shortly after switch on or during a print cycle. If the fuser is disconnected,... -
IRC4085 Jamming at finisher inlet
Getting finisher jam code 0109. I'm out from office for a couple days and could use some help on this one. Machine works fine with finisher disconnected,... -
C253 Powering problem
I'm experiencing very difficult problem with a c253 Machine which is powering on for only 2sec.
i have tried replacing all the boards (Power supply,MFB... -
problem with ricoh 2232c
Hello, i am having a problem with the copier saying to add yellow toner.
I have tried 3 different cartridges, I also disconnected the lines and...
